Brand new ⌛ Everbuild Quick Drying Clear Matt Varnish 750ml WVARCLM07 ????

Quick Drying Ultra Hard Clear Varnish MATT 750ml

MPN: WVARCLM07

Barcode: 5029347914516

750ml Matt Professional quality ultra-hard, scratch resistant
and heatproof, non-yellowing finish a low solvent varnish thats ideal
for use on interior wood surfaces such as

tables, chairs, doors, skirtings, furniture and more.

Touch dry in just 30 minutes overcoat after 1 hour.

Clear Matt finish with no discoloration that enhances the natural qualities of wood, and provides long lasting protection.

Main Points

Quick Drying Matt natural finish Clear Varnish

low solvent

Enhances the natural qualities of wood,

Provides long lasting protection.

Ultra-hard, scratch resistant, heatproof,

non-yellowing finish.

Coverage:

Up to 16 square metres per litre.

Coverage will vary depending on the absorbency of the wood.

Application:

Ensure
wood is clean, dry and free from dirt or dust by wiping with a lint
free cloth dampened with white spirit, allow to dry before applying
varnish.

On varnished wood, remove any unsound varnish and sand
the surface with medium grade sandpaper well to a uniformed appearance
and then clean with white spirit.

Allow to dry thoroughly before applying Everbuild Clear Varnish. On bare wood, sand the surface with fine sandpaper.

Always remove excess dust with a cloth before applying varnish.

Brush
apply Everbuild Clear Varnish, following the direction of the wood
grain, approximately 2-3 coats will be required for full coverage.

It is touch dry in 30 minutes, allow 1 hour in between coats lightly sand the surface before applying the final coat.

Always
apply the varnish to a wet edge, working systematically across the
surface keeping the wet edge moving together as much as possible.

Clean brushes thoroughly with water after use, a little washing up liquid will assist brush cleaning.

If
water is accidently spilt on the surface within 2-3 days of
application, remove by wiping gently with a soft cloth (do not rub).

Note: on application, the varnish will appear slightly white this quickly turns completely clear as the drying process starts.

Important notes:

Do not use on wood floors or decking.

Do not use externally.

Protect from frost and do not use in temps below 10 deg C.

Everbuild WVARCLM07 Information:

Everbuild Clear Matt Varnish Technical Data Sheet

Everbuild Clear Matt Varnish Safety Data Sheet

Manufacturer Everbuild Interior Varnish Product Page