New ✨ Everbuild Roll & Stroll Premium Carpet Protector 25m ROLL20 ⭐

Everbuild Roll and Stroll Premium Carpet Protector 25 meters x 600mm

Barcode: 5029347605636

MPN: ROLL20

EVERBUILD 25M ROLL & STROLL PREMIUM CARPET PROTECTOR is ideal for protecting against mess, dirt, staining, spillages and soiling that occurs during painting,

plastering, building, tiling, general maintenance and repair work.

Roll & Stroll is ideal for protecting stair carpets fits perfectly on most standard size stair treads

Can be used for commercial and domestic applications and the roll and stroll is much safer than dust sheets as will not cause a trip hazard.

Roll and Stroll is ideal for a multitude of uses on site
and commercial applications.

Designed for heavy usage Roll
and Stroll has a heavy-duty anti-slip cross weave which will help prevent it tearing or
ripping.

Can be used on site to protect new carpets that have been laid but these carpets must be hoovered first or the fluff that comes from a new carpet may prevent the film from sticking perfectly.

Specification and Main Points

• As Roll & Stroll is totally waterproof it gives piece of mind against expensive to clean paint and Liquid spillages.
• Due to the adhesive face being reverse wound, Roll and Stroll easily unwinds making application easy.
• Easy roll out with no specialist applicator equipment required.
• Will not creep and wrinkle after application and stays where it is put.
• Easily removed and will not leave a sticky residue.
• Can be left down for up to 4 weeks.
• Adheres to most common carpet types.
• No trip risk Safer than dust sheets.

Roll and Stroll Limitations:

This product is for application to carpets only not hard surfaces.

Use Roll and Stroll Hard Surface Protector.

Vacuuming prior to use is recommended.

Roll & Stroll must be removed after a maximum of 4 weeks to prevent a sticky residue being left.

In heavily trafficked areas or where air temperature exceeds 220 deg C remove Roll & Stroll after only 1 week.

Do not use underfloor heating whilst product is in situ.

Application:

1. Ensure surfaces to which Roll and Stroll is to be applied are clean sound, dust free and dry.
2. Remove outer packaging from roll.
3. Place roll on the floor facing the direction it is to be applied and unwind approx 12 inches 300mm of material.
4. Ensure the roll is stuck by smoothing out by either hand or foot.
5. Simply push roll forward using hands or feet ensuring roll goes in a straight line.
6. Smooth out with hands or feet as it unwinds.
7. A very effective way of laying Roll and Stroll is to push the roll along with a soft broom using the brush to smooth out and remove air bubbles as it unwinds.

Everbuild ROLL20 Official Information:

Everbuild Premium Roll and Stroll Technical Data Sheet

Everbuild Premium Roll and Stroll Safety Data Sheet

Everbuild Roll Stroll Premium Carpet Protection Product Page

All Roll and Stoll Protective Surface Film